Home About us Products Models News Honor Network Contact us Substation
location:Home > Conveyor Equipment ComponentsNews > Analysis of the deviation of belt conveyor

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Analysis of the deviation of belt conveyor
Clicks:17384 Date:4-7
Belt conveyor deviation is usually refers to the belt conveyor in the operation of the conveyor belt is not in accordance with the central position of the conveyor belt around the normal operation. Analysis of belt conveyor width 800mm lag is to mechanized speedy drivage temporary installation, running in the transmission of power with floating operation in the triple acceptor roller roller and two roller belt conveyor, the rotation of the roller conveyor belt to a resistance and a guiding force, to transport with the frame is straight, the material on the conveyor belt is in the middle position of the roller guiding force uniform, and the direction of belt conveyor is the same, then there is no deviation; and in the actual production of conveyor belt rack can reach an ideal state of the straight, level will with the change of roadway to the conveyor belt, the delivery of the materials is not an ideal state of the uniform, so the conveyor belt at the supporting force and the change at any time, by the power to overcome resistance and guiding force is affected Direct cause of belt deviation.
Roller hanging on the beam is allowed to have a small amount of adjustable space to change the direction of guiding force of roller, line maintenance equipment mechanic is constantly changing the guiding force direction of roller for conveyer belt adjustment.
This not only saves manpower and roller conveyor belt into adjustment is not timely still appear deviation caused by the conveyor belt on the two sides of the shelf material spilled phenomenon, these materials need manpower to clean, thus reducing production efficiency increase the labor intensity, so contrary to the modern mine production concept. The design of the anti deviation roller is the result of the rational use of the guiding force after the qualitative change, to a certain extent, laid the foundation for the integrated transportation system.
Previous article: Selection of roller form      Next article: Design of a new type of self-aligning roller
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.